Board abbreviations: how to read a catalogue and a technical datasheet

November 20 , 2026

When you open a catalog and come across HB.H, EN 622-2, S1S or E1, it looks like a code reserved for specialists, but each abbreviation sums up something very practical: what type of board it is, under what conditions it can be used and which standard it meets.

Knowing how to read them saves time when requesting a quote and prevents you from choosing a board that doesn’t fit your application. Here is a quick guide to decoding them.

Board type: HB, MDF and HDF

HB (hardboard)

A hard, high-density wood fiberboard. It can be manufactured by the wet process (the traditional one) or the dry process. It is the product family we specialize in, through the wet process, where we make use of lignin (the wood’s own natural adhesive).

MDF and HDF

These are medium- and high-density fiberboards, respectively. They are manufactured by the dry process and are often confused with hardboard, but they are a different family, with different properties and applications.

The suffix that indicates use: H, LA, E

After “HB” you will usually find one or more letters that specify the environment or function the board is designed for:

  • HB

General use in dry environments.

  • HB.H

For humid environments (the H stands for humid).

  • HB.LA

Board with mechanical requirements to bear loads in dry environments (load-bearing). Variants for humid environments (HLA) also exist.

  • HB.E

For exterior use.

With HTP, this difference is reflected in the range: HTP Tempered Premium (HB) and Tempered Premium Plus (HB.H).

The standard behind it: EN 622

The EN 622 series sets out the European requirements for fiberboards. Part EN 622-2 is the one that applies to hardboard. When a data sheet cites the standard, it means the board is evaluated using a recognized method that is comparable between manufacturers.

Formaldehyde emission: E1-E0.5

E1, which was the most widespread European low-emission standard for furniture and interiors, is the most common formaldehyde emission class for wood-based panels in Europe. It is one of the most frequently consulted abbreviations in furniture, interior design and construction projects, because it indicates that the product meets the established limit for indoor use.

The new mandatory limits in the European Union halve the permitted emissions for furniture and boards. The new limit is ≤ 0.062 mg/m³ (half that of the E1 class).

The face finish: S1S

S1S (smooth on one side) indicates that the board is smooth on one face and that the other has a mesh texture. It is the typical hardboard finish and determines how it will be lacquered, laminated or glued.

Here is a quick and simple summary table:

Abbreviation What it means
HB Hardboard, general use in dry environments
HB.H Hardboard for humid environments
HB.LA Hardboard for load-bearing use, dry environments
HB.E Hardboard for exterior use
MDF / HDF Medium- / high-density fiberboards
EN 622-2 European hardboard standard
E1 Formaldehyde emission class
E 0.5 New European standard
S1S Smooth on one side

Questions about a technical data sheet?

At HTP Global Group, we want reading a catalog to be easy for you. If an abbreviation doesn’t add up or you’re unsure between two references, contact our team and we will help you choose the right board for your project.

Share: